Release notes

v0.20.1

• Changed functions allel.stats.fst.weir_cockerham_fst() and allel.stats.ld.locate_unlinked() such that chunked implementations are now used by default, to avoid accidentally and unnecessarily loading very large arrays into memory (#50).

v0.20.0

• Added new allel.model.dask module, providing implementations of the genotype, haplotype and allele counts classes backed by dask.array (#32).
• Released the GIL where possible in Cython optimised functions (#43).
• Changed functions in allel.stats.selection that accept min_ehh argument, such that min_ehh = None should now be used to indicate that no minimum EHH threshold should be applied.

v0.19.0

The major change in v0.19.0 is the addition of the new allel.model.chunked module, which provides classes for variant call data backed by chunked array storage (#31). This is a generalisation of the previously available allel.model.bcolz to enable the use of both bcolz and HDF5 (via h5py) as backing storage. The allel.model.bcolz module is now deprecated but will be retained for backwargs compatibility until the next major release.

Other changes:

• Added function for computing the number of segregating sites by length (nSl), a summary statistic comparing haplotype homozygosity between different alleles (similar to IHS), see allel.stats.selection.nsl() (#40).
• Added functions for computing haplotype diversity, see allel.stats.selection.haplotype_diversity() and allel.stats.selection.moving_haplotype_diversity() (#29).
• Added function allel.stats.selection.plot_moving_haplotype_frequencies() for visualising haplotype frequency spectra in moving windows over the genome (#30).
• Added vstack() and hstack() methods to genotype and haplotype arrays to enable combining data from multiple arrays (#21).
• Added convenience function allel.stats.window.equally_accessible_windows() (#16).
• Added methods from_hdf5_group() and to_hdf5_group() to allel.model.ndarray.VariantTable (#26).
• Added allel.util.hdf5_cache() utility function.
• Modified functions in the allel.stats.selection module that depend on calculation of integrated haplotype homozygosity to return NaN when haplotypes do not decay below a specified threshold (#39).
• Fixed missing return value in allel.stats.selection.plot_voight_painting() (#23).
• Fixed return type from array reshape() (#34).

Contributors: alimanfoo, hardingnj

v0.18.1

• Minor change to the Garud H statistics to avoid raising an exception when the number of distinct haplotypes is very low (#20).

v0.18.0

• Added functions for computing H statistics for detecting signatures of soft sweeps, see allel.stats.selection.garud_h(), allel.stats.selection.moving_garud_h(), allel.stats.selection.plot_haplotype_frequencies() (#19).
• Added function allel.stats.selection.fig_voight_painting() to paint both flanks either side of some variant under selection in a single figure (#17).
• Changed return values from allel.stats.selection.voight_painting() to also return the indices used for sorting haplotypes by prefix (#18).

v0.17.0

• Added new module for computing and plotting site frequency spectra, see allel.stats.sf (#12).
• All plotting functions have been moved into the appropriate stats module that they naturally correspond to. The allel.plot module is deprecated (#13).
• Improved performance of carray and ctable loading from HDF5 with a condition (#11).

v0.16.2

• Fixed behaviour of take() method on compressed arrays when indices are not in increasing order (#6).
• Minor change to scaler argument to PCA functions in allel.stats.decomposition to avoid confusion about when to fall back to default scaler (#7).

v0.16.1

• Added block-wise implementation to allel.stats.ld.locate_unlinked() so it can be used with compressed arrays as input.

v0.16.0

• Added new selection module with functions for haplotype-based analyses of recent selection, see allel.stats.selection.

v0.15.2

• Improved performance of allel.model.bcolz.carray_block_compress(), allel.model.bcolz.ctable_block_compress() and allel.model.bcolz.carray_block_subset() for very sparse selections.
• Fix bug in IPython HTML table captions.
• Fix bug in addcol() method on bcolz ctable wrappers.

v0.15.1

• Fix missing package in setup.py.

v0.15

• Added functions to estimate Fst with standard error via a block-jackknife: allel.stats.fst.blockwise_weir_cockerham_fst(), allel.stats.fst.blockwise_hudson_fst(), allel.stats.fst.blockwise_patterson_fst().
• Fixed a serious bug in allel.stats.fst.weir_cockerham_fst() related to incorrect estimation of heterozygosity, which manifested if the subpopulations being compared were not a partition of the total population (i.e., there were one or more samples in the genotype array that were not included in the subpopulations to compare).
• Added method allel.model.AlleleCountsArray.max_allele() to determine highest allele index for each variant.
• Changed first return value from admixture functions allel.stats.admixture.blockwise_patterson_f3() and allel.stats.admixture.blockwise_patterson_d() to return the estimator from the whole dataset.
• Added utility functions to the allel.stats.distance module for transforming coordinates between condensed and uncondensed forms of a distance matrix.
• Classes previously available from the allel.model and allel.bcolz modules are now aliased from the root allel module for convenience. These modules have been reorganised into an allel.model package with sub-modules allel.model.ndarray and allel.model.bcolz.
• All functions in the allel.model.bcolz module use cparams from input carray as default for output carray (convenient if you, e.g., want to use zlib level 1 throughout).
• All classes in the allel.model.ndarray and allel.model.bcolz modules have changed the default value for the copy keyword argument to False. This means that not copying the input data, just wrapping it, is now the default behaviour.
• Fixed bug in GenotypeArray.to_gt() where maximum allele index is zero.

v0.14

• Added a new module allel.stats.admixture with statistical tests for admixture between populations, implementing the f2, f3 and D statistics from Patterson (2012). Functions include allel.stats.admixture.blockwise_patterson_f3() and allel.stats.admixture.blockwise_patterson_d() which compute the f3 and D statistics respectively in blocks of a given number of variants and perform a block-jackknife to estimate the standard error.

v0.12

• Added functions for principal components analysis of genotype data. Functions in the new module allel.stats.decomposition include allel.stats.decomposition.pca() to perform a PCA via full singular value decomposition, and allel.stats.decomposition.randomized_pca() which uses an approximate truncated singular value decomposition to speed up computation. In tests with real data the randomized PCA is around 5 times faster and uses half as much memory as the conventional PCA, producing highly similar results.
• Added function allel.stats.distance.pcoa() for principal coordinate analysis (a.k.a. classical multi-dimensional scaling) of a distance matrix.
• Added new utility module allel.stats.preprocessing with classes for scaling genotype data prior to use as input for PCA or PCoA. By default the scaling (i.e., normalization) of Patterson (2006) is used with principal components analysis functions in the allel.stats.decomposition module. Scaling functions can improve the ability to resolve population structure via PCA or PCoA.
• Added method allel.model.GenotypeArray.to_n_ref(). Also added dtype argument to allel.model.GenotypeArray.to_n_ref() and allel.model.GenotypeArray.to_n_alt() methods to enable direct output as float arrays, which can be convenient if these arrays are then going to be scaled for use in PCA or PCoA.
• Added allel.model.GenotypeArray.mask property which can be set with a Boolean mask to filter genotype calls from genotype and allele counting operations. A similar property is available on the allel.bcolz.GenotypeCArray class. Also added method allel.model.GenotypeArray.fill_masked() and similar method on the allel.bcolz.GenotypeCArray class to fill masked genotype calls with a value (e.g., -1).

v0.11

• Added functions for calculating Watterson’s theta (proportional to the number of segregating variants): allel.stats.diversity.watterson_theta() for calculating over a given region, and allel.stats.diversity.windowed_watterson_theta() for calculating in windows over a chromosome/contig.
• Added functions for calculating Tajima’s D statistic (balance between nucleotide diversity and number of segregating sites): allel.stats.diversity.tajima_d() for calculating over a given region and allel.stats.diversity.windowed_tajima_d() for calculating in windows over a chromosome/contig.
• Added allel.stats.diversity.windowed_df() for calculating the rate of fixed differences between two populations.
• Added function allel.model.locate_fixed_differences() for locating variants that are fixed for different alleles in two different populations.
• Added function allel.model.locate_private_alleles() for locating alleles and variants that are private to a single population.

v0.10

• Added functions implementing the Weir and Cockerham (1984) estimators for F-statistics: allel.stats.fst.weir_cockerham_fst() and allel.stats.fst.windowed_weir_cockerham_fst().
• Added functions implementing the Hudson (1992) estimator for Fst: allel.stats.fst.hudson_fst() and allel.stats.fst.windowed_hudson_fst().
• Added new module allel.stats.ld with functions for calculating linkage disequilibrium estimators, including allel.stats.ld.rogers_huff_r() for pairwise variant LD calculation, allel.stats.ld.windowed_r_squared() for windowed LD calculations, and allel.stats.ld.locate_unlinked() for locating variants in approximate linkage equilibrium.
• Added function allel.plot.pairwise_ld() for visualising a matrix of linkage disequilbrium values between pairs of variants.
• Added function allel.model.create_allele_mapping() for creating a mapping of alleles into a different index system, i.e., if you want 0 and 1 to represent something other than REF and ALT, e.g., ancestral and derived. Also added methods allel.model.GenotypeArray.map_alleles(), allel.model.HaplotypeArray.map_alleles() and allel.model.AlleleCountsArray.map_alleles() which will perform an allele transformation given an allele mapping.
• Added function allel.plot.variant_locator() ported across from anhima.
• Refactored the allel.stats module into a package with sub-modules for easier maintenance.

v0.9

• Added documentation for the functions allel.bcolz.carray_from_hdf5(), allel.bcolz.carray_to_hdf5(), allel.bcolz.ctable_from_hdf5_group(), allel.bcolz.ctable_to_hdf5_group().
• Refactoring of internals within the allel.bcolz module.

v0.8

• Added subpop argument to allel.model.GenotypeArray.count_alleles() and allel.model.HaplotypeArray.count_alleles() to enable count alleles within a sub-population without subsetting the array.
• Added functions allel.model.GenotypeArray.count_alleles_subpops() and allel.model.HaplotypeArray.count_alleles_subpops() to enable counting alleles in multiple sub-populations in a single pass over the array, without sub-setting.
• Added classes allel.model.FeatureTable and allel.bcolz.FeatureCTable for storing and querying data on genomic features (genes, etc.), with functions for parsing from a GFF3 file.
• Added convenience function allel.stats.distance.pairwise_dxy() for computing a distance matrix using Dxy as the metric.

v0.7

• Added function allel.io.write_fasta() for writing a nucleotide sequence stored as a NumPy array out to a FASTA format file.

v0.6

• Added method allel.model.VariantTable.to_vcf() for writing a variant table to a VCF format file.